Paper Mill in Abu Dhabi selects ABUS again – THE BEST IN TERMS OF QUALIITY
A strong reason for choosing ABUS as a supplier, was that they realized that ABUS cranes are the most reliable and service-friendly cranes in the market, according to their own maintenance staff. The paper mill machine supplier from Sweden selected ABUS as they have a very good experience working with ABUS cranes in their previous projects in the Middle East. Ace Cranes , authorized representatives of ABUS cranes Germany in the Middle east region supplied and installed 4 EOT cranes.
The Overhead crane 9t + 9t was supplied with a Motorized rotating spreader beam 14.0 ton x 5980 mm span for positioning of Paper Reel Spools on the Paper Mill Machines. ABUS EOT and jib cranes at a pump manufacturer’s site New jib cranes and EOT Cranes were used in addition to the reused cranes. A pillar jib crane of the VS type with a height of over 8 metres, a load capacity of 4 tonnes and a jib arm length of 5 metres was supplied among others. This jib crane features an electric wire rope hoist and was mounted in the underground car park. It serves the loading area on the level above through an opening between the levels.
All movements of the crane are electric due to the SWL of 4 tonnes, i.e. the crane features electric slewing as well as electric trolley travelling. The project also includes a 32 metre long crane track with three single girder underslung EOT cranes of the EDL type and each of them comes with two hoists with load capacities of 4 tonnes each. The underslung EOT cranes feature rolled section girders and screwed main girder connections. This type of crane is particularly suited to complicated space and construction conditions as the crane track is mounted onto the ceiling instead of onto pillars. In addition, lower trolley end approach dimensions allow the optimal use of the exiting bay width. The main girder slots in between the end carriages which means that the highest hook position can be optimised also. A separate crane track was fitted with a single girder EOT crane of the ELV type with two electric chain hoists with SWLs of 1 tonne each which give it a total load capacity of 2 tonnes in this case.
The control of the crane, an ABUS radio remote control ABURemote Button, allows the hoists to be used individually as well as in tandem. The jib crane is also controlled by radio remote control so that the crane user will be able to move loads while standing in a safe place and keeping an eye on all crane movements. Four workshop cranes complete the building’s crane park: Jib cranes of the LS type with safe working loads of 1 tonne each and jib arm lengths of 3 metres. These cranes are used to move smaller components directly onto the work benches of the work places in order to check them for possible damages. Slewing and trolley travelling are manual as the SWLs are quite inferior compared to the big VS jib crane.
The electric chain hoists are operated via push button pendants on these cranes. Thus the ABUS EOT cranes and jib cranes work together on two levels for an optimised material flow. The EOT cranes transport heavier loads across the entire bay while the smaller jib cranes are serving the work stations: they make it quick and efficient to load individual work benches.